24 DePuy Synthes Power Tools Battery Power Line II User’s Manual
Operating Instructions
Attachments for Battery Reamer/Drill II
Drill Chuck, Keyless, Drill Speed (530.731)
•
Maximum speed: approx. 930 rpm
•
Maximum torque: approx. 6.0 Nm
•
Cannulation: 3.2 mm diameter
•
Accepts round and triangular shafts up to 7.3 mm
diameter
Technical data is subject to tolerances.
Insert Instrument
Open the chuck jaws by holding on to the retaining ring
and manually turning the chuck (Figure 1).
Insert the instrument shaft into the opened chuck.
Close the chuck by holding on to the release ring and
manually turning the chuck in the opposite direction
(Figure 2).
Ensure the instrument shaft is centered in the chuck.
Remove Instrument
Open the chuck jaws by holding on to the retaining ring
and manually turning the chuck. Remove the instrument.
Figure 1
Figure 2
