Johnson & Johnson ASP STERRAD 200, User Manual

Page: 32 / 85

4
Day-to-Day Operation
30 STERRAD
®
200 User’s Guide
Using the Displays
The following table presents typical buttons that you use to perform tasks related
to sterilizing your instruments or to actually starting the sterilization cycle.
These buttons do not appear on all displays. On two door units, the current
display is shown on both sides. However, only one side at a time has an active
touch screen. The active side is the input side when items are being loaded, load
item data is being entered and the cycle is in progress. The output side is the
active side when a cycle has completed successfully and the load can be
removed.
Button Function
Touch to begin the sterilization cycle.
Touch to cancel a cycle or any other operation.
Touch to open the sterilizer door. This button is
only available when the cycle is not running.
The door it controls is the door on the active side.
You cannot open both doors at once. The Close
Door button has the arrow pointing upwards.
Touch to return to the previous display.
Touch to confirm an action you have taken.
Touch to open the Function Button Bar. This
button bar has different button choices depending
on whether the system is running a cycle, is
being serviced, or is idle.
Touch to log in to the system prior to running a
cycle. Also, allows you to log out from the
system.
In the password administration display, touch
this button to add a new user. You may not have
access depending on your password level.