Johnson & Johnson ASP STERRAD 200, User Manual

Page: 41 / 85

Day-to-Day Operation
4
STERRAD
®
200 User’s Guide 39
•
Scan a pre-determined list using barcodes and the barcode scanner. Point the
scanner head at the barcode and touch the button. An audible beep is heard
when the barcode is successfully read. The red light must cover the barcode
from left to right.
•
Enter a list using the virtual keyboard and touching the “typewriter” keys on
the display. After entering load item information touch
Enter . A new line
appears prompting you to enter the next item. As multiple items are entered,
the list expands and up and down scroll arrows appear on the right hand side
of the list.
•
Use an external keyboard the same way as shown above to enter the
information.
Note: The external keyboard must be attached and the system
booted in order to function.
2. Touch Done to complete the entry of the load list.
3. If you would like to enter additional information pertaining to the load such
as the doctor’s name, etc., follow this step. Otherwise you may go to step 5.
Touch
GO TO... to open the function button bar. Touch Cycle Notes to
open the Notes display. Enter any text information that is exclusive to this
load (use the up and down arrows to scroll through the information). This
information can be printed separately by touching
Print . It also prints as part
of the process completion data.
4. Touch Done to complete the entry of the notes.
5. Touch Start Cycle to begin the cycle as shown in the “Starting a Cycle”
section.