Johnson & Johnson ASP STERRAD 200, User Manual

Page: 39 / 85

Day-to-Day Operation
4
STERRAD
®
200 User’s Guide 37
Using Chemical Indicator Tape
STERRAD SealSure
®
Chemical Indicator Tape should be used to secure the
polypropylene sterilization wrap around the instrument tray.
Figure 8. STERRAD
®
SealSure
®
Chemical Indicator Tape should be used to
secure the polypropylene wrap around each instrument tray.
Please refer to the Instructions for Use included with the STERRAD SealSure
®
Chemical Indicator Tape for more information.
Preparing the Two-Tier Shelf
The procedures listed here must be followed for safe placement of the trays and
pouches on the two-tier shelf when used with the carriage.
•
Make sure the two-tier shelf is fully seated on the carriage and locked to the
carriage before placing items on the two-tier shelf. The alignment wheels on
the bottom of the two-tier shelf should be on the outside of the carriage rails.
•
Place items on the two-tier shelf so that the items do not protrude from the
sides, the back, the top, or the front. The two-tier shelf may be loaded from
any position that is comfortable.
•
Do not stack trays on top of each other.
•
Do not place pouches directly on the shelves.
•
When the carriage has been unloaded, it should be located in areas where it
will not impede foot traffic. Follow your facility’s policy for storage of such
items.
•
If the two-tier shelf is being used without the carriage, it must remain inside
the sterilizer and be firmly locked in place.