Johnson & Johnson ASP STERRAD 200, User Manual

Page: 69 / 85

Day-to-Day Operation
4
STERRAD
®
200 User’s Guide 67
System Configuration Screen
To display the System Configuration screen, touch System Config on the
Configuration Menu.
The System Configuration screen allows you to display and/or enter identifying
and configuration information about the sterilizer. This information is typically
entered at the factory or by an ASP service technician when the sterilizer is
installed and is ordinarily not changed in the field.
Figure 32. System Configuration.
♦
The Sterilizer Identification block allows you to enter the name of your
facility and a label that identifies the individual machine. The serial number
is displayed for information purposes and cannot be changed by the user.
♦
The Door/Side Configuration block indicates the number of doors and which
door is used for cycle loading.
♦
The Language Selection block allows you to choose the language used on all
sterilizer displays.
♦
Touch Done to return to the Configuration Menu.
♦
Touch Cancel to cancel any changes you made to fields in the System
Configuration screen.