91
Models
Revision 03-2012
Toucan 1210
Toucan 1310
ELECTRICAL SYSTEM
4
4
a. 7V < voltage < 9V
Power turned on. Platform controls or
ground controls selected. All controls in
neutral position.
b. 3.5V < voltage < 4V
Joystick controller out of neutral position
but at the beginning of its course.
Acceleration value will still 0% as long as
the voltage is over 3.5V.
c. Voltage < 150 mV
Joystick controller at the end of its course.
Acceleration value nearing or equal to
100%.
d. 0.75V < voltage < 1.10V
Voltage threshold for the automatic switch
to 3rd gear (0.75 V corresponds to an
acceleration value near 80% - 1.10V
corresponds to an acceleration value near
70%).
NOTE
1
: Following typical values of the analogical
input [E10] can be measured between battery
negative terminal and pin #14 of the motor
speed controller connector (connector must
still plugged to the controller socket).
