Models
Revision 03-2012
60
Toucan 1210
Toucan 1310
4.2. Sensors
4.2.1 Mast position switch [SW4]
When the telescopic mast leaves its lowered position,
the switch is actuated and provides :
- Supply cut (+) to the coil [HI/LO] of the
distribution manifold for the wheel motors.
- Supply cut (+) to the coil [EVC] of the brake
manifold.
- Actuation of the selective cut of movements
when the aerial work platform is tilting (See §
4.1.6).
- The automatic switch to slow drive speed
(parameter "Test 3" on controller =CL when a
drive movement is controlled - see § 4.5).
4.2.2. Jib lower position switch [SW5]
When the jib is raised, the switch is actuated and
causes :
- The supply cut (+) to the coil [HI/LO] of the
distribution manifold for the wheel motors.
- The supply cut (+) to the coil [EVC] of the brake
manifold.
- Actuation of the selective cut of movements
when the aerial work platform is tilting (See §
4.2.6).
- The automatic switch to slow drive speed
(parameter "Test 3" on controller =CL when a
drive movement is controlled - see § 4.5).
ELECTRICAL SYSTEM
4
4
4.2.3. Telescope position switch [SW2]
When the telescope is extended, the switch is
actuated and causes :
- The supply cut (+) to the coil [HI/LO] of the
distribution manifold for the wheel motors.
- The supply cut (+) to the coil [EVC] of the brake
manifold.
- Actuation of the selective cut of movements
when the aerial work platform is tilting (See §
4.2.6).
- The automatic switch to slow drive speed
(parameter "Test 3" on controller =CL when a
drive movement is controlled - see § 4.5).
Jib lower position switch
