JDS Uniphase SmartClass, User Manual

Page: 31 / 90

Chapter 3 Instrument Settings
Restoring factory defaults
SmartClass ADSL/Copper Tester User’s Guide 17
Restoring factory defaults
The following procedure describes how to reset the ADSL/Copper Tester to
factory default settings.
To reset to factory defaults
1 Select SYSTEM SETUP from the Main Menu.
2 Select FACTORY DEFS .
You may have to scroll to find the FACTORY DEFS selection.
A confirmation menu appears.
3 Press the OK key to reset the defaults or Cancel to keep the current
settings.
NOTE:
Restoring factory defaults will reset test application settings and system set-
tings (such as contrast and language). It does NOT change or delete stored
configurations or saved results.