JCM GLOBAL UBA Pro Series, Operation And Maintenance Manual

Page: 72 / 132

P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
6 - 2
Section 6 UBA™ Pro Series Universal Banknote Acceptor Calibration and Testing
5. Click the “ Next> ” Screen Button (Figure
6-4 a ) when the “
Destination Folder
” Screen
shown in Figure 6-4 appears.
6. When the “
Ready to Install the Program
” Screen
appears, select “
Anyone who uses this computer
(all users)
” (Figure 6-5 a ) and then click the
“
Install
” Screen Button (Figure 6-5 b ) to
start the installation.
7. Once installation is complete, the “
InstallShield
Wizard Completed
” Screen shown in Figure 6-6
will appear.

Click the “
Finish
” Screen Button (Figure
6-6 a ) to end the installation process.
This completes the “
JCM Tool Suite Standard Edition
”
installation procedure.
Part 2 - USB Drivers Installation
USB Drivers need to be installed on the PC before
the JCM Tool Suite Standard Edition can be used.
To install the Driver, proceed as follows:
1. Copy the provided Driver into the desired PC
Folder.
2. Connect the USB Cable to the Unit. (Refer to
Figure 6-1 for the Tool Requirements and Har-
ness Connector locations.)
3. When the Device Driver Installation Wizard
Screen (Figure 6-7) appears, click the “ Next> ”
Screen Button (Figure 6-7 a ) to install the
driver.
4. When the USB Driver Installation is complete,
the “
Completing the Device Driver Installation
Wizard
” Screen will appear as shown in Figure 6-
8.
5. Click the “
Finish
” Screen Button (Figure
6-8 a ) to close the Screen.
This completes the USB driver installation proce-
dure.
Figure 6-4 JCM Tool Suite Installation 3
Figure 6-4 JCM Tool Suite Installation 3
a
Figure 6-5 JCM Tool Suite Installation 4
Figure 6-5 JCM Tool Suite Installation 4
b
a
Figure 6-6 JCM Tool Suite Installation 5
Figure 6-6 JCM Tool Suite Installation 5
a
NOTE: The USB Driver Installation Wizard
Screen appears when the JCM Tool Suite
installation is completed (Go to Step 3).
NOTE: Step 1 and 2 are reserved for when the
USB Drivers need to be installed manually.
Figure 6-7 USB Drivers Installation 1
Figure 6-7 USB Drivers Installation 1
a
Figure 6-8 USB Drivers Installation 2
Figure 6-8 USB Drivers Installation 2
a
NOTE: If the Windows Security Screen appears,
select “Install this Driver Software (I)” to proceed.