JCM GLOBAL UBA Pro Series, Operation And Maintenance Manual

Page: 121 / 132

Troubleshooting UBA™ Pro Series Universal Banknote Acceptor Appendix A
P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
A - 7
Flashes
(7)
OFF
Denomination Error
The Sensor detected an abnormal
Banknote Type.
•
Check that the relative parts
are properly assembled and/or
Harness are connected.
•
Clean or adjust the relative
parts and Sensors.
•
Line Sensor
Flashes
(8)
OFF
Photo Level Error
While transporting a Banknote,
transparent tape was detected.
•
Check that the relative parts
are properly assembled and/or
Harness are connected.
•
Clean or adjust the relative
parts and Sensors.
•
Line Sensor
Flashes
(9)
OFF
Inhibit Setting Abnormal
The Banknote Accept/Inhibit
Setting was made by a Command
from the Host Machine. DIP
Switch settings are incorrect.
•
Check that the Commands
from the Host Machine are
correct or change the setting to
be acceptable for use with the
Unit.
•
Command
Flashes
(10)
OFF
Reserved
Contact your local JCM Representative if this error occurs.
Flashes
(11)
OFF
Reserved
Contact your local JCM Representative if this error occurs.
Flashes
(13)
OFF
Banknote Length
Abnormal
The Line Sensors calculated a
Banknote length longer or shorter
than the specified value.
•
Check that the relative parts
are properly assembled and/or
Harness are connected.
•
Clean or adjust the relative
parts and Sensors.
•
Line Sensor
Flashes
(14)
OFF
2-Color Margin Abnormal
The Line Sensors calculated that
the 2-Color Banknote margin was
greater than the specified value.
•
Check that the relative parts
are properly assembled and/or
Harness are connected.
•
Clean or adjust the relative
parts and Sensors.
•
Line Sensor
Flashes
(15)
OFF
Counterfeiting Banknote
Action
The Banknote has been validated
as a Counterfeit Banknote.
•
Check that the relative parts
are properly assembled and/or
Harness are connected.
•
Clean or adjust the relative
parts and Sensors.
•
Line Sensor
Flashes
(16)
OFF
3-Color Comparison
Abnormal
The Line Sensors calculated a 3-
Color comparison that was
greater than the specified value.
•
Check that the relative parts
are properly assembled and/or
Harness are connected.
•
Clean or adjust the relative
parts and Sensors.
•
Line Sensor
Table A-6 LED Flash Reject Error Codes For Banknotes (Continued)
Green
LED
Red
LED Reject Errors (Banknote)
Solutions
Relative
Parts/Sensors