JCM GLOBAL UBA Pro Series, Operation And Maintenance Manual

Page: 45 / 132

P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
2 - 1 7
Installation UBA™ Pro Series Universal Banknote Acceptor Section 2
Cleaning Procedure
To clean the UBA Pro Unit, gently rub the Sensors
or Rollers in the Banknote Path using a dry, soft,
lint-free, Micro-fiber Cloth ONLY.
1. Remove electrical power from the UBA Pro Unit.
2. Open the UBA Pro Unit’s Upper Guide.
3. Clean the appropriate path and Lens of each

Sensor and Roller. (Refer to “Sensor and Roller
Locations” on page 2-18 for each Sensor and
Roller that requires cleaning.)
To keep the UBA Pro Unit’s performance
optimal, perform routine cleaning and
maintenance:
•
At least once a month; and/or
•
Whenever Sensors, Rollers or Banknote Path
are dirty due to dust, foreign objects or
similar debris adhering to them.
Caution: Do not use alcohol, thinner or
citrus based products for cleaning any
Banknote Transport Sensors or
surfaces. The lenses can become
clouded by chemical evaporation
residue that may cause acceptance
errors.
Caution: Be sure to use non-flammable
compressed air only.
Caution: DO NOT let liquids or fluids
drip into the Unit’s interior; otherwise,
the Unit may not operate correctly.
NOTE: When closing or installing the UBA
Pro Unit, ensure it firmly latches into place.
Also, when re-installing the UBA Pro Unit,
ensure that it re-seats correctly into place.
Figure 2-15 General Cleaning Image
Figure 2-15 General Cleaning Image
Sensors
Roller
Dry Lint-free Cloth/Cotton Swab/
Before
Cleaning
After
Cleaning
Non-flammable Air Jet