JCM GLOBAL UBA Pro Series, Operation And Maintenance Manual

Page: 92 / 132

P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
6 - 2 2
Section 6 UBA™ Pro Series Universal Banknote Acceptor Calibration and Testing
3. Apply electrical power.
4. Confirm that the
Green and Red Status LEDs are
lit.
5. To start the Test, set the DIP Switch #8 to
OFF
(Figure 6-105).
6. Set the DIP Switches to
OFF
(Figure 6-106).
7. Confirm that the Red LED is lit.
8. Set the DIP Switches to
OFF
(Figure 6-108).
9. The Green LED will be lit.
10. Set the UBA Pro DIP Switch #8 to
ON
to end the
test.
Stacking Operation Test
To perform the Stacking Operation Test, proceed as
follows:
1. Remove electrical power.
2. Set the DIP Switches as below (Figure 6-110).
3. Apply electrical power.
4. Confirm that the Green and Red Status LEDs are
lit.
5. To start the Test, set the DIP Switch #8 to
OFF
(Figure 6-112).
6. The stacking operation will begin.
7. Set the UBA Pro DIP Switch #8 to
ON
to end the
test.
Figure 6-104 DI
Figure 6-104 DIP Switch Test 2
Green Red
Figure 6-105 DIP
Figure 6-105 DIP Switch Test 3
DIP Switch #8 OFF
ON
1 2 3 4 5 6 7 8
Figure 6-106 DIP
Figure 6-106 DIP Switch Test 4
DIP Switches #1, #3, #5, #7 OFF
ON
1 2 3 4 5 6 7 8
Figure 6-107 DI
Figure 6-107 DIP Switch Test 5
Red
Figure 6-108 DIP
Figure 6-108 DIP Switch Test 6
DIP Switches #2, #4, #6 OFF
ON
1 2 3 4 5 6 7 8
Figure 6-109 DI
Figure 6-109 DIP Switch Test 7
Green
Figure 6-110 Stacking Operation Test 1
Figure 6-110 Stacking Operation Test 1
DIP Switches #3, #8 ON
ON
1 2 3 4 5 6 7 8
Figure 6-111 St
Figure 6-111 Stacking Operation Test 2
Green Red
Figure 6-112 Stacking
Figure 6-112 Stacking Operation Test 3
DIP Switch #8 OFF
ON
1 2 3 4 5 6 7 8