JCM GLOBAL UBA Pro Series, Operation And Maintenance Manual

Page: 120 / 132

Appendix A UBA™ Pro Series Universal Banknote Acceptor Troubleshooting
P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
A - 6
ICB Error Code Conditions
Table A-5 lists the various ICB LED Flash Error Code causes and solutions.
LED Flash Reject Error Code Conditions; Banknotes
Table A-6 lists the various LED Flash Reject Code causes and solutions for Banknotes.
Table A-5 ICB LED Error Codes
Green
LED
Red
LED
ICB Errors Solutions
Relative
Parts/Sensors
OFF
Flashes
(3)
Incorrect ICB Settings
The ICB function is disabled on
the UBA Pro Unit when the
Intelligent Cash Box is used.
•
Change the ICB settings to
be acceptable for use with
the Cash Box.
•
ICB Settings
OFF
Flashes
(11)
ICB Communication
Error
ICB unable to communicate.
•
Check that the ICB settings
are properly set.
•
ICB Circuit Board
•
ICB Sensor
•
Cash Box
•
ICB Board
OFF
Flashes
(12)
ICB Checksum Error
ICB data is incorrect.
•
Initialize the ICB Box data
using Read Write Tool.
•
Cash Box ICB Module
OFF
Flashes
(13)
ICB Number Error
The Game Machine Number is
different.
•
Initialize the ICB Box data
using Read Write Tool.
•
Cash Box ICB Module
OFF
Flashes
(14)
ICB Initialize Error
The Intelligent Cash Box has not
been initialized.
•
Initialize the ICB Box data
using Read Write Tool.
•
Cash Box ICB Module
OFF
Flashes
(15)
ICB Module Error
While communicating to the ICB,
the Intelligent Cash Box has been
removed.
•
Check that the ICB settings
are properly set.
•
Firmly re-seat the Intelligent
Cash Box
•
Cash Box
Table A-6 LED Flash Reject Error Codes For Banknotes
Green
LED
Red
LED Reject Errors (Banknote)
Solutions
Relative
Parts/Sensors
Flashes
(1)
OFF
Skewed Insertion Error
The Banknote has been inserted
in an incorrect/crooked direction.
•
Check that the relative parts
are properly assembled and/or
Harness are connected.
•
Clean or adjust the relative
parts and Sensors.
•
Centering Guide
•
Centering Sensor
•
Belts
•
Rollers
Flashes
(3)
OFF
Remaining Banknotes
Returned
While Initializing, Sensors
detected that Banknotes
remained in the UBA Pro Unit’s
Validation path.
•
Check that the relative parts
are properly assembled and/or
Harness are connected.
•
Clean or adjust the relative
parts and Sensors.
•
Centering Sensor
•
Line Sensor
•
Feed Sensor
•
Exit Sensor 2
Flashes
(4)
OFF
Magnification Abnormal
When adjusting Banknote data,
Sensors detected an abnormal
Banknote magnification condition.
•
Check that the relative parts
are properly assembled and/or
Harness are connected.
•
Clean or adjust the relative
parts and Sensors.
•
Line Sensor
Flashes
(5)
OFF
Banknote Transportation
Abnormal
Sensors detected Banknotes
remain in the validation path, or
none existed during abnormal
timing interval.
•
Check that the relative parts
are properly assembled and/or
Harness are connected.
•
Clean or adjust the relative
parts and Sensors.
•
Entrance Sensor
•
Centering Sensor
•
Line Sensor
•
Feed Sensor
•
Exit Sensor 2
•
Transport Sensor
Flashes
(6)
OFF Reserved Contact your local JCM Representative if this error occurs.