JCM GLOBAL UBA Pro Series, Operation And Maintenance Manual

Page: 95 / 132

P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
6 - 2 5
Calibration and Testing UBA™ Pro Series Universal Banknote Acceptor Section 6
Entrance Motor Operation Test
(Reverse)
To perform the Entrance Motor Operation Test in the
reverse rotation, proceed as follows:
1. Remove electrical power.
2. Set the DIP Switches as below (Figure 6-129).
3. Apply electrical power.
4. Confirm that the Green and Red Status LEDs are
lit.
5. Lift up on the Upper Guide Access Lever to open
the UBA Pro’s Cover
6. To start the Test, set the DIP Switch #8 to
OFF
(Figure 6-131).
7. The Rollers will start running in the reverse
direction when the Feed Motor functions prop-
erly.
8. Set the UBA Pro DIP Switch #8 to
ON
to end the
test.
Entrance and Feed Motors

Simultaneous Operation Test (For-
ward)
To perform the Motor Operation Test of the Entrance
Motor and the Feed Motor in the forward rotation at the
same time, proceed as follows:
1. Remove electrical power.
2. Set the DIP Switches as below (Figure 6-133).
3. Apply electrical power.
4. Confirm that the
Green and Red Status LEDs are
lit.
5. Lift up on the Upper Guide Access Lever to open
the UBA Pro’s Cover
6. To start the Test, set the DIP Switch #8 to
OFF
(Figure 6-135).
7. The Rollers will start running in the forward
direction when the Entrance and Feed Motors
function properly.
8. Set the UBA Pro DIP Switch #8 to
ON
to end the
test.
Figure 6-129 Entrance Motor Operation Test
(Reverse) 1
Figure 6-129 Entrance Motor Operation Test

(Reverse) 1
DIP Switches #5, #6, #8 ON
ON
1 2 3 4 5 6 7 8
Figure 6-130 E
Figure 6-130 Entrance Motor Operation Test

(Reverse) 2
Green Red
Figure 6-131 Entrance Motor Operation Test
(Reverse) 3
Figure 6-131 Entrance Motor Operation Test

(Reverse) 3
DIP Switch #8 OFF
ON
1 2 3 4 5 6 7 8
Figure 6-132 Entrance Motor
Figure 6-132 Entrance Motor Operation Test

(Reverse) 4
Figure 6-133 Entrance and Feed Motors
Simultaneous Speed Test (Forward) 1
Figure 6-133 Entrance and Feed Motors

Simultaneous Speed Test (Forward) 1
DIP Switches #1, #6, #8 ON
ON
1 2 3 4 5 6 7 8
Figure 6-134 E
Figure 6-134 Entrance and Feed Motors

Simultaneous Speed Test (Forward) 2
Green Red
Figure 6-135 Entrance and Feed Motors
Simultaneous Speed Test (Forward) 3
Figure 6-135 Entrance and Feed Motors

Simultaneous Speed Test (Forward) 3
DIP Switch #8 OFF
ON
1 2 3 4 5 6 7 8
Figure 6-136 Entrance and
Figure 6-136 Entrance and Feed Motors

Simultaneous Speed Test (Forward) 4