JCM GLOBAL UBA Pro Series, Operation And Maintenance Manual

Page: 61 / 132

P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
4 - 3
Disassembly/Reassembly UBA™ Pro Series Universal Banknote Acceptor Section 4
2. Release the six (6) Locking Tabs (Figure 4-9 a
1
through a
6
), and remove the Side Cover L (Fig-
ure 4-9 b ).
3. Remove the five (5) Screws (Figure 4-10 a
1
through a
5
).
4. Hold each side of the Bottom Cover (Figure 4-11
a ) with your hands as illustrated in Figure 4-11.
5. Slide and remove the Cover as indicated by the
Arrow.
6. Remove the two (2) Screws (Figure 4-12 a
1
&
a
2
), and remove the Sub Board (Figure 4-12 b ).
Main Board Removal
To remove the Main Board, proceed as follows:
1. Unplug the two (2) Connectors (Figure 4-13 a
1
&
a
2
), and remove the FPC Harness (Figure 4-13 b )
as illustrated by the Arrows.
2. Unplug the six (6) Connectors (Figure 4-14 a
1
through a
6
).
Figure 4-9 Sub Board Removal 2
b
a
1
a
6
a
2
a
3
a
4
a
5
Figure 4-9 Sub Board Removal 2
Figure 4-10 Sub Board Removal 3
a
1
a
2
a
3
a
4
a
5
Figure 4-10 Sub Board Removal 3
Figure 4-11 Sub Board Removal 4
Figure 4-11 Sub Board Removal 4
a
b
NOTE: Do Not lift up the Release Lever
(Figure 4-11 b ) when removing the Bottom
Cover to avoid the risk of damage to the
Main Board.
Figure 4-12 Sub Board Removal 5
a
1
a
2
b
Figure 4-12 Sub Board Removal 5
Figure 4-13 Main
Board Removal 1
b
a
1
Figure 4-13 Main Board Removal 1
a
2
b
Figure 4-14 Main Board Removal 2
a
1
a
6
a
2
a
3
a
4
a
5
Figure 4-14 Main Board Removal 2