JCM GLOBAL UBA Pro Series, Operation And Maintenance Manual

Page: 93 / 132

P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
6 - 2 3
Calibration and Testing UBA™ Pro Series Universal Banknote Acceptor Section 6
PB Motor Operation Test
To perform the PB Motor Operation Test, proceed as
follows:
1. Remove electrical power.
2. Set the DIP Switches as below (Figure 6-113).
3. Apply electrical power.
4. Confirm that the
Green and Red Status LEDs are
lit.
5. Lift up on the Upper Guide Access Lever to open
the UBA Pro’s Cover
6. To start the Test, set the DIP Switch #8 to
OFF
(Figure 6-115).
7. The PB Guide will start moving when the PB
Motor functions properly.
8. Set the UBA Pro DIP Switch #8 to
ON
to end the
test.
Centering Motor Operation Test
To perform the Centering Motor Operation Test, pro-
ceed as follows:
1. Remove electrical power.
2. Set the DIP Switches as below (Figure 6-117).
3. Apply electrical power.
4. Confirm that the
Green and Red Status LEDs are
lit.
5. Lift up on the Upper Guide Access Lever to open
the UBA Pro’s Cover
6. To start the Test, set the DIP Switch #8 to
OFF
(Figure 6-119).
7. The Centering Mechanism will start moving
when the Centering Motor functions properly.
8. Set the UBA Pro DIP Switch #8 to
ON
to end the
test.
Figure 6-113 PB Motor Operation 1
Figure 6-113 PB Motor Operation 1
DIP Switches #5, #8 ON
ON
1 2 3 4 5 6 7 8
Figure 6-114 P
Figure 6-114 PB Motor Operation 2
Green Red
Figure 6-115 PB Motor
Figure 6-115 PB Motor Operation 3
DIP Switch #8 OFF
ON
1 2 3 4 5 6 7 8
Figure 6-116 PB Motor Operation 4
Figure 6-116 PB Motor Operation 4
PB Guide
Figure 6-117 Centering Motor Operation 1
Figure 6-117 Centering Motor Operation 1
DIP Switches #1, #5, #8 ON
ON
1 2 3 4 5 6 7 8
Figure 6-118 C
Figure 6-118 Centering Motor Operation 2
Green Red
Figure 6-119 Centerin
Figure 6-119 Centering Motor Operation 3
DIP Switch #8 OFF
ON
1 2 3 4 5 6 7 8
Figure 6-120 Centering Motor Operation 4
Figure 6-120 Centering Motor Operation 4
Centering Mechanism