JCM GLOBAL UBA Pro Series, Operation And Maintenance Manual

Page: 60 / 132

P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
4 - 2
Section 4 UBA™ Pro Series Universal Banknote Acceptor Disassembly/Reassembly
3. Unplug the two (2) Connectors (Figure 4-4 a
1
&
a
2
), and remove the FPC Harness (Figure 4-4 b ).
4. Remove the three (3) Screws (Figure 4-5 a
1
through a
3
), and remove the LED Light Module
(Figure 4-5 b ).
5. Remove the two (2) Screws (Figure 4-5 c
1
& c
2
),
and remove the Upper Bar Sensor (Figure 4-5 d ).
Box Sensor Removal
To remove the Box Sensor, proceed as follows:
1. Release the two (2) Locking Tabs (Figure 4-6 a
1
& a
2
), and remove the Back Cover (Figure 4-6 b ).
2. Unplug the single (1) Connector (Figure 4-7 a ),
and remove the FPC Harness (Figure 4-7 b ).
3. Remove the two (2) Screws (Figure 4-7 c
1
& c
2
),
and remove the Box Sensor (Figure 4-7 d ).
Sub Board Removal
To remove the Sub Board, proceed as follows:
1. Release the six (6) Locking Tabs (Figure 4-8 a
1
through a
6
), and remove the Side Cover R (Fig-
ure 4-8 b ).
Figure 4-3 LED Light Module and Upper Bar
Sensor Removal 2
b
a
1
a
6
a
3
a
4
a
5
a
2
Figure 4-3 LED Light Module and Upper Bar
Sensor Removal 2
Figure 4-4 LED Light Module and Upper Bar
Sensor Removal 3
b
a
2
a
1
Figure 4-4 LED Light Module and Upper Bar
Sensor Removal 3
Figure 4-5 LED Light Module and Upper Bar
Sensor Removal 4
d
a
1
a
2
b
a
3
c
1
c
2
Figure 4-5 LED Light Module and Upper Bar
Sensor Removal 4
Figure 4-6 Box Sensor Removal 1
b
a
1
a
2
Figure 4-6 Box Sensor Removal 1
Figure 4-7 Box Sensor Removal 2
c
2
d
c
1
a
b
Figure 4-7 Box Sensor Removal 2
Figure 4-8 Sub Board Removal 1
b
a
1
a
6
a
2
a
3
a
4
a
5
Figure 4-8 Sub Board Removal 1