manualshive.com logo in svg

JCM GLOBAL UBA Pro Series, Operation And Maintenance Manual

The JCM GLOBAL UBA Pro Series is a cutting-edge bill acceptor designed for high-volume environments. For detailed instructions on how to operate and maintain this state-of-the-art device, download the free Operation And Maintenance Manual from manualshive.com. Stay ahead of the curve with this essential manual for your UBA Pro Series.

Share
Download
background image

Table of Contents

Page

P/N 960-000211R_Rev. A 

© 2020, JAPAN CASH MACHINE CO., LTD. 

i i i

UBA™ Pro Series Universal Banknote Acceptor 

Japan Cash Machine Co., LTD. (HQ) ....................................................................................... 3-1

4  DISASSEMBLY/REASSEMBLY ............................................................................ 4-1

Tool Requirements......................................................................................................... 4-1
UBA Pro and Cash Box Removal ................................................................................. 4-1
LED Light Module and Upper Bar Sensor Removal.................................................... 4-1
Box Sensor Removal ..................................................................................................... 4-2
Sub Board Removal ....................................................................................................... 4-2
Main Board Removal...................................................................................................... 4-3
Centering Motor Harness Assy. Removal.................................................................... 4-4
Entrance Motor Harness Assy. Removal ..................................................................... 4-5
Centering HP Board Removal ....................................................................................... 4-5
PB Encoder HP Board Removal ................................................................................... 4-6
PB Motor Harness Assy. Removal ............................................................................... 4-6
Stack Motor Harness Assy. Removal........................................................................... 4-7
Transport Motor Harness Assy. Removal.................................................................... 4-7
PDIC Array Removal ...................................................................................................... 4-8
Lower BAR Sensor Removal......................................................................................... 4-9
Slide Roller Removal ..................................................................................................... 4-9

5  WIRING DIAGRAMS .............................................................................................. 5-1

UBA Pro Wiring Diagram............................................................................................... 5-1

6  CALIBRATION AND TESTING .............................................................................. 6-1

Tool Requirements......................................................................................................... 6-1
Installation Procedures ................................................................................................. 6-1

Part 1 - JCM Tool Suite Installation ............................................................................................. 6-1

Part 2 - USB Drivers Installation ...................................................................................... 6-2

JCM Tool Suite Standard Edition Mode ....................................................................... 6-3
Software Download........................................................................................................ 6-3
Calibration ...................................................................................................................... 6-5

When to Calibrate ............................................................................................................ 6-5
Placing Reference Paper  ................................................................................................ 6-5
Sensor Calibration............................................................................................................ 6-5

Performance Test Using a PC....................................................................................... 6-8

List of UBA Pro Performance Tests ................................................................................. 6-8
Launch Performance Test Program ................................................................................. 6-8
Banknote Acceptance Test with Cash Box ...................................................................... 6-8
Banknote Acceptance Test without Cash Box ................................................................. 6-9
Non-Validation Banknote Acceptance Test with Cash Box.............................................. 6-9
Non-Validation Banknote Acceptance Test without Cash Box......................................... 6-9
Non-Validation Banknote Reject Test with Cash Box ...................................................... 6-9
Feed Motor Speed Test (Forward)................................................................................. 6-10
Feed Motor Speed Test (Reverse)................................................................................. 6-10
Sensor Test.................................................................................................................... 6-11
Aging Test ...................................................................................................................... 6-11
DIP Switch Test.............................................................................................................. 6-11
Stacker Motor Operation Time Test ............................................................................... 6-12

Summary of Contents for UBA Pro Series





































































































































Reviews:

No comments

Related manuals for UBA Pro Series

Brands by name

Popular brands

Load more brands