JCM GLOBAL UBA Pro Series, Operation And Maintenance Manual

Page: 39 / 132

Installation UBA™ Pro Series Universal Banknote Acceptor Section 2
P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
2 - 1 1
Sub Board 2: USB Connector Pin Assignment
Table 2-9 lists the UBA Pro Unit’s Sub Board 2 USB Connector Pin Assignments.
Table 2-9 Sub Board 2 USB Connector Pin Assignments
Socket (UBA Pro Side): DRA-20PC-FO (JAE)
Contact (UBA Pro Side) Pin No.1 and No.2: D02-22-22P-10000 (JAE)
Contact (UBA Pro Side) Pin No.3 - No.20:D02-22-26P-10000 (JAE)
Socket (Frame Side): DRA-20SC-FO (JAE)
Contact (Frame Side) Pin No.1 and No.2: D02-22-22S-10000 (JAE)
Contact (Frame Side) Pin No.3 - No.20: D02-22-26S-10000 (JAE)
Pin No. Signal Name
I/O
*
*. I/O (input/output) is the terminal as viewed from the Banknote Acceptor’s backside.
Function
1
Power
- +12V to +24V DC Power Supply
2 GND (Power) - DC Power Supply
3 M.RES IN Acceptor Reset Signal Line
4 - - No Connection
5 +12V (I/F) - Interface Power Supply (+12V DC)
6 - - No Connection
7 - - No Connection
8 VBUS - USB Communication Vbus Signal Line (+5V DC)
9 DATA- IN/OUT USB Communication Input/Output Signal Line
10 DATA+ IN/OUT USB Communication Input/Output Signal Line
11 - - No Connection
12 GND (USB) - USB Communication Ground (0V DC)
13 GND (SG) - 0V DC Power Supply
14 LED POWER - LED Drive Line (Anode)
15 - - No Connection
16 - - No Connection
17 - - No Connection
18 LED - OUT LED Drive Line (Cathode)
19 - - No Connection
20 SU SELECT
IN
Standard (SS)/Stacking Up (SU) Selection
†
†. No Connection = Standard (SS) Installation type. Connected Pin #20 to Pin #13 (GND SG) = Stacking Up (SU) Installation type.
Rear View