JCM GLOBAL UBA Pro Series, Operation And Maintenance Manual

Page: 18 / 132

P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
1 - 2
Section 1 UBA™ Pro Series Universal Banknote Acceptor General Information
Model Descriptions
Table 1-1 lists the UBA Pro Product Model
Number Descriptions.
Type Descriptions
Table 1-2 lists the UBA Pro Type Number
Descriptions.
Software Descriptions
Table 1-3 lists the Software Number Descrip-
tions.
Precautions
The Figure 1-2 symbols are defined as follows:
1.
(Type 1)
Do not insert a damaged or exhibited
unfit condition Banknote; it may cause a jam
inside the unit.
Table 1-1 UBA Pro Model Number Specifications
N
o
(1) Model Name (UBA Pro Series)
(2)
Validation Sensor
5 = World Wide Type 1 (Standard)
6 = Reserved
(3)
Barcode Sensor Board (Optional)
0 = Upper only (Standard)
1 = Upper and Lower
(4)
Acceptor Head Unit Type
0 = Centering Type (Banknote Short Side: 62mm - 85mm)
1 = Reserved
(5) Input Section Unit (Optional)
None = Standard
(6)
Stacking Type
None = Acceptor Head Unit only
SS = Security Stacker (common for SU)
(7) Cash Box Access
None = Front Access (Standard)
Table 1-2 UBA Pro Type Number Specifications
N
o
(1)
Cash Box Capacity
0 = No Cash Box (Acceptor Head Unit only)
5 = 500 notes (Street Grade)
9 = 900 notes (Street Grade)
(2)
Cash Box Type
0 = Deep Green (Standard)
(3)
Cash Box Handle
0 = Blue (Standard)
(4)
Acceptor Head Unit Sub Board Type
0 = Unassigned Number

1 = Sub Board 1 (RS232/Photo-Coupler Isolation/TTL/2 USBs)
2 = Sub Board 2 (RS232/Photo-Coupler Isolation/TTL/ccTalk/1 USB)
3 = Reserved
4 = Reserved
(5)
Acceptor Head Unit Cover
0 = Black (Standard)
(6)
Bezel (Option)
0 = No Bezel
1 = Black/2 Green LEDs (Bezel 85) (Standard Installation)
2 = Reserved
8 = Reserved
9 = Reserved
A = Reserved
B = Black/2 Blue LEDs (SU Installation)
(7)
ICB (Option)
*
0 = Not Supported
1 = Supported
(8)
Optional Conversion Circuit Board
0 = No Optional Conversion Circuit Board (Standard)
(9)
Interface Setting (Factory Default)
†
0 = Reserved
P = Photo-Coupler Isolation
R = RS232C
Model: UBA - * * * - (*) * * (*)
(1)
(2)(3)(4) (6) (7) (5)
Type: * * * - * * - * * * * *(*)
(1)(2)(3)(4) (6)(7)(8)(9)(10) (5)
(10)
External Harness
0 = None
1 = Standard Interface Harness 1 (No USB, UBA-1x Series Type)
2 = Standard Interface Harness 2 (1 USB, iPRO Series Type)
3 = Standard Interface Harness 3 (2 USBs, UBA Pro Series Type)
5 = Reserved
6 = Reserved
7 = Reserved
8 = Reserved
9 = Reserved
A = Reserved
5U = Reserved
6U = Reserved
7U = Reserved
8U = Reserved
*. A specific ICB Box is required.
†. Refer to “SW1 and SW2 Configurations” on page 2-4 for details.
Table 1-3 UBA Pro Software Number
Specifications
N
o
(A) Software Model Name
(B) Country Code (Denomination)
*
*. The Country Code is indicated by three (3) Alphabetical Characters following the
JIS Standard.
(C) Interface Protocol Name
(D) Software Version
Table 1-2 UBA Pro Type Number Specifications
N
o
Type: * * * - * * - * * * * *(*)
(1)(2)(3)(4) (6)(7)(8)(9)(10) (5)
NOTE: Refer to “Recommended Wire”
on page 2-6 for your original harness.
(A) (D)
Software: UBA-5**-(*) * *(*) * * * - 0 * * - V * .**
(B) (C)
Caution: User cautions should be
included in any user guides or manuals.
Caution: Careful measures were taken in
the design of this product to ensure its
quality; however, ensure that a fail-safe
design is used for the Host Machine to
assure safety.
Figure 1-2 Precautionary Symbols
Figure 1-2 Precautionary Symbols
Type1 Type2 Type3
NOTE: Refer to “Banknote Fitness
Requirements” on page 1-4.