![background image](http://html1.mh-extra.com/html/jcb/robot-150/robot-150_service-manual_3636997092.webp)
2 - 1
Section C
Electrics
9803/8500
Section C
2 - 1
Issue 1
Test Methods
How to Use a Multimeter
These instructions are intended to cover the use of the recommended AVO 2003 and a moving pointer (analogue) meter.
1
Make sure that the test leads are plugged into the correct sockets. The black probe should be plugged into the black socket
(sometimes, this socket is also marked by a "-", or "E" or marked as "COMMON" or "COM"). The red probe should be
plugged into the red socket marked with "+", "V" or "û".
2
Ensure that the test probes have a good clean contact with bare metal, free from grease, dirt, and corrosion, as these can
cause a false reading.
3
When measuring voltage:
Make sure that the correct range is selected, that is set the selector to a value equal to or greater than that you are about to
measure.
e.g. If asked to measure 12 Volts, set the selector to the 12 V range. If there is no 12 V range, set the selector to the next
range higher, 20 V for instance.
If the meter is set to a range that is too low, it may be damaged.
e.g. setting to the 2 V range to measure 12 V.
A
OFF
V/A
V/A
C
A
B
A171890
C
C
A
A
B
B
Summary of Contents for ROBOT 150
