14 - 11
Checking the Joystick Hydraulic Lines
If the machine does not respond to joystick movements,
check the hydraulic supply to and from the joystick as follows:
!
!
WARNING
The following procedure requires the machine to be
disabled (wheels raised off the ground, work function
disconnected etc.) while the work is carried out.
HYD 8-1/1
1
Raise and block the machine so that the wheels are clear
of the ground. Stop the engine. Make sure the machine is
stable.
2
Remove the seat and floorplate to access the hose
connections
A
and
B
.
3
Insert a tee piece and 0 - 40 bar (0 - 600 lb/in
2
, 0 - 42
kg/cm
2
) pressure gauge as shown at
X
into the supply
hose at the pressure reducing solenoid valve at position
A
.
4
Start the engine and observe the gauge reading which
should show the main pump charge pressure (see
Hydraulics Technical Data).
Section E
Hydraulics
9803/8500
Section E
14 - 11
Issue 1
Problem Solving
5
If the gauge shows no or little pressure it could indicate a
fault in the charge pressure relief valve in the hydrostatic
pump or the pressure reducing solenoid valve
C
.
6
If the supply pressure is correct, check the feed hose to
the joystick for blockage.
7
Remove the tee piece and gauge and connect into each
servo feed line in turn, at positions
B
.
8
Start the engine and move the joystick lever to pressurise
the relevant hose. The lever should be moved in the
direction of the appropriate hose.
9
Compare the pressure gauge readings with the figures
shown in Hydraulics Technical Data -
Joystick Output
Characteristics
.
10
If any readings are not correct, check the hoses for
blockage. If the hoses are clear the joystick should be
dismantled for repair.
X
B
B
B
B
B
B
B
B
A
A
C
C
325380
Summary of Contents for ROBOT 150
