![background image](http://html1.mh-extra.com/html/jcb/robot-150/robot-150_service-manual_3636997252.webp)
1 - 2
Section K
Engine
9803/8500
Section K
1 - 2
Issue 4*
Specification
Technical Data - JCB Diesel engine
Type
4 cylinder in-line, compression ignition, naturally aspirated.
Bore (nominal)
84 mm (3.31 in)
Stroke
100 mm (3.94 in)
Swept Volume
2216 cm
3
(135.2 in
3
)
Compression Ratio
22 : 1
Injection Sequence
1,3,4,2
Valve Clearance - Cold - Inlet and Exhaust
0.2 mm (0.0078 in)
Oil Pressure
2.6 - 3.5 bar (38 - 52 lbf/in
2
, 2.7 - 3.6 kgf/cm
2
)
Speeds
150 up to machine serial number 677999 and 165
Rated Speed
2800 rev/min
Idling Speed
850 - 950 rev/min
150 from machine serial number 678000
Rated Speed
2600 rev/min
Idling Speed
890 - 910 rev/min
Fuel System
Injection Pump Type
Bosch 104135-4010
Governing
Mechanical
Static Timing
19° BTDC
Injector Codes
Bosch 105148-1170
Injector Setting Pressure
147 bar (2133 lbf/in
2
, 150 kgf/cm
2
)
Cooling System
Fan Type
Mechanical
Coolant Pressure
1 bar (14.5 lbf/in
2
, 1.02 kgf/cm
2
)
Thermostat operating temperature
82 - 94 °C (180 - 200 °F)
Temperature Warning Light operates at
97 - 103 °C (207 - 217 °F)
Note:
If at anytime during the life of a machine it is necessary to fit a new engine, then after the first 50 operating hours a new
engine oil filter must be fitted and the engine oil changed. Failure to complete this could damage the engine.
Note:
Should further details be required, refer to Engine Service Manual 9806/2100.
*
Summary of Contents for ROBOT 150
