9 - 1
Transmission
Drive Chain Lubrication
The final drive to the wheels is by chains. A chain casing on
each side of the machine houses two chains, one to the front
wheel and one to the rear wheel. The chains run in an oil
bath.
Checking the Oil Levels
-
for interval see Service Schedule
1
Park the machine on level ground.
2
Stop the engine.
3
On the left side of the machine, remove inspection plug
A
and check that the oil level is up to the bottom of the
aperture.
4
If necessary, top up through the aperture using the
recommended oil. Wipe up any oil spillage.
5
Check that the washer on plug
A
is undamaged. Replace
if necessary.
6
Clean plug
A
and its aperture before refitting. Do not
overtighten or you could strip the threads of the housing.
7
Repeat steps 3 to 6 on the right side of the machine.
Changing the Oil
-
for interval see Service Schedule
1
Park the machine on level ground.
2
Stop the engine.
3
On the left side of the machine, remove inspection plug
A
.
4
Place a suitable receptacle under plug
B
to collect the
oil.
5
Remove plug
B
and completely drain the chain casing.
6
Clean both plugs and their apertures. Replace the
sealing washers if necessary.
7
Refit plug
B
.
8
Using the recommended oil, fill the chain casing via plug
A aperture until the oil is level with the bottom of the
aperture. Wipe up any oil spillage.
9
Refit plug
A
.
Do not
overtighten or you could strip the
threads of the housing.
10
Repeat steps 3 to 9 for the right side chain casing.
Section 3
Routine Maintenance
9803/8500
Section 3
9 - 1
Issue 1
Note:
This diagram shows the location of the chain casing plugs on the left side of the machine. The right side casing is a mirror
image of the left side casing. The rear wheel is shown removed for clarity.
A
A
B
B
174360
Summary of Contents for ROBOT 150
