jcb ROBOT 150, Service Manual

Page: 91 / 254

1 - 3
Fuses - later machines
The electrical circuits are protected by fuses. The fuses are
located towards the rear of the switch/warning indicator panel
as shown in the illustration.
Note: Depending on the number of options specified, the
machine may be fitted with either one fuse board X or both
fuse boards
X
and
Y
.
Relays - later machines
Relays (A) Relay type
Indicator Flasher Unit PC
Door Open/Close Switch MF (Blue relay)
Alarm Buzzer PD
Auxiliary Isolation Relay PS (Black relay)
Glow Plug Relay B
The Glow Plug Relay for JCB Diesel engines is visually
different but in the same location.
Section C
Electrics
9803/8500
Section C
1 - 3
Issue 5*
Technical Data
174511
B B
201900
A A
Fuse Machine with Fuse Size Machine with Fuse Size
Number fuse board X only fuse boards X and Y
1 Interior light, Beacon 10 amp Interior light, Roadlights 15 amp
2 Front and rear working lights 15 amp Beacon 10 amp
3 Interlock relay, Brake solenoid, 5 amp Interlock relay, Brake solenoid, 10 amp
Operational solenoid (servo only), Operational solenoid (servo only)
Reverse alarm
4 Auxiliary hydraulics (servo only), 5 amp Heated seat, Auxiliary hydraulics (servo only) 10 amp
High-flow solenoid (10 High-flow)
5 ESOS, warning lights and buzzer, 5 amp ESOS, warning lights and buzzer, 5 amp
Hour meter, Float solenoid (servo only) Hour meter, High-flow solenoid, (10 High-flow)
Float solenoid (servo only)
6 Horn 15 amp Horn, Front working lights, Brake lights 10 amp
7 Not used Hazard lights 10 amp
8 Not used Wipers and Washer 10 amp
9 Not used Heater/Blower, Reverse Alarm 10 amp
10 Not used Rear working light, Indicators 10 amp
11 Not used L.H. Sidelights, Number plate light 5 amp
12 Not used R.H. Sidelights 5 amp
*