________________________________________________________________________________________________________________________________________________________________
CN3600 Setup & Operation Manual Revision : 6/2020
26
3.3.2 SETTING AUTOMATIC KNIFE SHARPENING
Select AUTOMATIC SHARPENING on Sharpening Selector Screen 17
Sharpening Auto Mode To select automatic sharpening. Touch Sharpening Auto
Mode to illuminate green button
Left Sharpening After
No of Cuts
To sharpen the left side of knife after number of cuts. If set
up to 5, it automatically sharpens after every five (5) cuts.
Left Sharpen Time
To set up sharpening time measured in seconds.
Right Sharpening After
Cut
To sharpen the right side of knife after number of cuts. If set
up to 5, it automatically sharpens once after every five (5)
cuts.
Right Sharpen Time
To set up sharpening time , measuring in seconds.
Knife RPM for
Sharpening
To set up the knife speed rpm) during the sharpening. The
setting range is at 0
– 640 rpm (normally at 150 – 200 rpm)
Screen 17 (Automatic Sharpening)
Typical Settings:
10
7
200
Typical Settings:
10
7
