________________________________________________________________________________________________________________________________________________________________
CN3600 Setup & Operation Manual Revision : 6/2020
10
3. MACHINE FUNCTIONS
The
JAVELIN
series J3600 is an automatic single knife, lathe type slitting machine.
Log rolls of tape can have a maximum diameter of
500 mm (
20") and minimum diameter
of
25.4 mm (
1"), this is depending on the mandrel fitted. Maximum roll width 1600mm
(63”).
3.1 OPERATOR PANEL AND SCREENS
3.1 1 MAIN ISOLATOR SWITCH & SAFETY FEATURES
MAIN ISOLATOR SWITCH
(see
Fig. 3-1A
)
This must be turned to the ‘
OFF
’ position before any electrical work is carried out. To gain
access to the main control cabinet, the isolator switch must be turned ‘
OFF
’ and the door
handle unlocked.
EMERGENCY STOP
(see
Fig. 3-1B
)
This switch is a red PUSH/PULL button and over-rides all operation. The switch must be
pulled outwards before the machine can be started.
START BUTTON
(see
Fig. 3-1B
)
(NOTE: Keyed Power Switch must be turned ON before Start Button will operate)
This green, illuminated push button is used to restart the system after it has been stopped.
The green lamp indicates that the system has been started.
SIDE DOOR OPEN/CLOSE:
Manually operated switch controlling side door and grip/release of expanding mandrel
(Note: A core or roll should be placed over the expanding rubber section of the mandrel when door is closed (ie mandrel expanded) to
prevent rubber becoming permanently deformed)
SAFETY FEATURE:
All guards/doors must be closed before machine will operate.
Fig. 3-1B Hand Held Module & Control Panel/Screen
Fig. 3.1A
Hand Held Module
Power Switch Power Start Stop Emergency Stop
When power turned on to Control Panel (Power
start) display will show fault error list (if any) Move to Screen
1 (Machine Settings) by pressing arrow and scrolling through
Open
↔
Close
Side Door/Expanding mandrel
