![background image](http://html1.mh-extra.com/html/ioselect/wmr-900/wmr-900_operating-manual_2087853048.webp)
© ioSelect Inc.
CONFIDENTIAL
48
io
Select
EtherWave - WMR
6.0 Configuration
6.1.4.1 Local IP Configuration
6.1.4.1.2 Router
Image 6G: Network Configuration (Router), Local IP Configuration
Submenu
If the EtherWave-WMR unit has been configured as a Router
(under the System Configuration menu), the Network Configuration
will present some additional options to those presented if the unit
was configured as a Bridge.
The Ethernet Port IP Configuration applies to the ‘wired’ port (at
rear of EtherWave-WMR unit), which may also be considered as
the WAN (Wide Area Network) port.
The Wireless Port IP Configuration applies to the LAN (Local Area
Network): the LAN consists of the devices, and EtherWave-WMR
units, connected to each other via the wireless (radio) network.
Refer to the preceding section for configuring the Ethernet Port,
keeping in mind that the settings apply only to the ‘wired’
connection of the MASTER unit.
There are two other options to be discussed further on the following
pages:
·
Wireless Port IP Configuration
·
VPN
Configuration
O n l y t h e M A S T E R
EtherWave-WMR unit may be
configured as a Router.