© ioSelect Inc.
CONFIDENTIAL
96
io
Select
EtherWave - WMR
6.0 Configuration
IP Protocol Config (continued)
·
Incoming Connection Timeout
Established when the TCP Server will terminate the
TCP connection is the connection is in an idle
state.
Default:
300
(seconds)
A UDP or TCP port is an
application end-point. The IP
address identifies the device
and, as an extension of the IP
address, the port essentially
‘fine tunes’ where the data is
to go ‘within the device’.
Be careful to select a port
n u m b e r t h a t i s n o t
p r e d e t e r m i n e d t o b e
associated with another
application type, e.g. HTTP
uses port 80.
TCP Client/Server:
In this mode, the EtherWave-WMR will be a
combined TCP Client and Server, meaning that it can both initiate
and serve TCP connection (session) requests. Refer to the TCP
Client and TCP Server descriptions and settings described
previously as all information, combined, is applicable to this mode.
continued...
