© ioSelect Inc.
CONFIDENTIAL
99
io
Select
EtherWave - WMR
6.0 Configuration
IP Protocol Config (continued)
UDP Multipoint-to-Multipoint
·
Multicast IP Address
A valid multicast address the unit will use to send
multicast UDP packets upon receiving them at its
serial port.
Default:
224.1.1.1
·
Multicast Port
UDP port that the packets are sent to. Multipoint
stations should be configured to listen to this port in
order to receive multicast packets.
Default:
20011
·
Time to Live
Time to live for the multicast packets.
Default:
1
(hop)
·
Listening Multicast IP Address
A valid multicast address the unit is to listen to
receive multicast UDP packets sent by another
UDP Multipoint-to-Multipoint unit.
Default:
224.1.1.1
·
Listening Multicast Port
UDP port that the unit will listen to for multicast
UDP packets sent by another UDP Multipoint-to-
Multipoint unit.
Default:
20011
SMTP Client:
If the EtherWave-WMR network has Internet access,
this protocol may be used to send the data received on the serial
port (COM1), in a selectable format (see Transfer Mode (below)), to
an e-mail addressee. Both the SMTP Server and the e-mail
addressee must be ‘reachable’ for his feature to function.
·
Mail Subject
Enter a suitable ‘e-mail subject’ (e-mail heading).
Default:
COM1 Message
·
Mail Server (IP/Name)
IP address or ‘Name’ of SMTP (Mail) Server.
Default:
0.0.0.0
continued...
SMTP: Simple Mail Transport
Protocol is a protocol used to
transfer mail across an IP
network.
