![background image](http://html1.mh-extra.com/html/ioselect/wmr-900/wmr-900_operating-manual_2087853098.webp)
© ioSelect Inc.
CONFIDENTIAL
98
io
Select
EtherWave - WMR
6.0 Configuration
IP Protocol Config (continued)
In a Point-to-Multipoint (PMP)
network topology which is to
utilize UDP multicast, typically
the MASTER would be
configured as ’(P)’ (the
POINT) and the REMOTES
would be configured as
’(MP)’ (the MULTIPOINTS).
UDP Point-to-Multipoint (MP):
This protocol is selected on the
units which are to receive multicast UDP packets, typically the
Remote units. See the previous description of UDP Point-to-
Multipoint (P).
·
Remote IP Address
The IP address of a distant device (EtherWave-
WMR or, for example, a PC) to which the unit
sends UDP packets of data received on the serial
port. Most often this is the IP address of the
Master EtherWave-WMR.
Default:
0.0.0.0
·
Remote Port
The UDP port associated with the Remote IP
Address (above). In the case of this ‘Remote’
being the Master EtherWave-WMR, the value in
this field should match the Listening Port of the
Master (see UDP Point-to-Multipoint (P)).
Default:
20011
·
Multicast IP Address
A valid MULTICAST address that this unit will use
to receive multicast UDP packets sent by a UDP
Point-to-Multipoint (P) unit. Note that the default
value for this field matches the default Multicast IP
Address of the UDP Point-to-Multipoint (P)
configuration described on the previous page.
Default:
224.1.1.1
·
Multicast Port
The UDP port that this unit will use, along with the
Multicast IP Address detailed above, to receive the
multicast UDP packets sent by the UDP Point-to-
Multipoint (P) unit.
Default:
20001