© ioSelect Inc.
CONFIDENTIAL
75
io
Select
EtherWave - WMR
6.0 Configuration
Unit Address
The unit address is, and must be, a unique identifier of each
modem in a network.
The Master has by default, and must retain, a unit address of 1;
65535 is the broadcast address.
number varies
2-65534
Values
RF Output Power
This setting establishes the transmit power level which will be
presented to the antenna connector at the rear of the EtherWave-
WMR.
Unless required, the RF Output Power should be set not for
maximum, but rather for the minimum value required to maintain an
adequate system fade margin.
dBm (mW equivalent)
20 (100)
21 (125)
22 (160)
23 (200)
24 (250)
25 (320)
26 (400)
27 (500)
28 (630)
29 (800)
30 (1000)
Values
If the Operation Mode is set
to MASTER, the Unit Address
field will NOT be displayed in
the Radio Configuration
menu.
By setting the unit to Master,
its Unit Address will be 1.
FCC regulations allow for
up to 36dBi effective
isotropic radiated power
(EIRP). The sum (in dBm)
of the transmitted power,
the cabling loss, and the
antenna gain cannot
exceed 36dBi.