INVT GD310-011P-4-UL, Operation Manual

Page: 152 / 269

GD310-UL series VFD Basic operation instruction
-144-
0
1
2
3
.
.
.
.
.
.
19
20
P06.14
P06.15
P06.16
AO1
AO2
HDO
P06.17
P06.18
P06.19
P06.20
P06.22
P06.23
P06.24
P06.25
P06.27
P06.28
P06.29
P06.30
P06.26
P06.21
P06.31
(default value is 0)
(default value is 0)
default value is 0)
P06.00
（ HDO output type selection ）
0 Running frequency 1 Set frequency
3 Running rotation speed 4 Output current (relative to the inverter)
6 Output voltage 7 Output power
9 Output torque 10 Analog AI1 input value
12 Analog AI3 input value 13 HDI input value
15 MODBUS communication setting 2 16 PROFIBUS communication setting 1
2 Ramp given frequency
5 Output current ( relative to the motor)
8 Set torque
11 Analog AI2 input value
14 MODBUS communication setting 1
17 PROFIBUS communication setting 1
18
Torque current (relative to the nominal
current of the motor)
19
Exciting current ( relative to the nominal
current of the motor)
20 Reserved
0
1
P06.00
0 : open collector high speed pulse
output
1 : open collector output
P06.01
,
P06.02
,
P06.03
,
P06. 04 output selection
Analog output curve setting Analog output selection Analog output filter setting
(
Output instructions:
Set value Function Instructions
0 Running frequency 0
–the max output frequency
1 Set frequency 0
– the max output frequency
2 Ramp given frequency 0
– the max output frequency
3 Running speed
0
–2 times of the rated synchronous rotation
speed of the motor
4 Output current (relative to the VFD) 0
–2 times of the rated current of the VFD
5 Output current (relative to the motor) 0
–2 times of the rated current of the VFD
6 Output voltage 0
–1.5 times of the rated voltage of the VFD
7 Output power 0
–2 times of the rated power
8 Setting torque value 0
–2 times of the rated current of the motor
9 Output torque 0
–2 times of the rated current of the motor
10 AI1 0
–10V/0–20mA
11 AI2 0
–10V/0–20mA
12 AI3 -10V
–10V
13 HDI 0.00
–50.00kHz
14
Setting value 1 of MODBUS
communication
-1000
–1000, 1000 corresponds to 100.0%