Intermec VT220/ANSI, Programmer'S Reference Manual

Page: 182 / 276

SECTION 8
"
Programming
8-46 VT220/ANSI Terminal Emulation Programmer’s Reference Guide
Tests and Adjustments
The wireless station has adjustment patterns you can in-
voke from the host computer with escape sequences. Ad-
justment sequences send uppercase E’s to the wireless sta-
tion’s display. Adjustment procedures are usually done only
by qualified technicians. For more information, contact the
Customer Response Center at the phone numbers listed in
the introduction to this programmer’s reference guide.
Table 8-31 shows the action taken by the wireless station
when it receives test and adjustment sequences.
Table 8-31
Tests and Adjustments
Name
(Mnemonic) Sequence
Wireless Station
Action
Tests
(DECTST)
CSI 4 ; Ps ; ..... ; Ps y Ignores this code.
Adjustments
(DECALN)
ESC # 8 Fills display with upper-
case E’s.
VT52 Mode Escape Sequence
The wireless station does not support VT52 mode, which
allows the VT220 to operate with DEC software written for
VT52 terminals.