Intermec VT220/ANSI, Programmer'S Reference Manual, Page: 93 / 276

SECTION 5
"
RT5900 Radio Terminal
VT220/ANSI Terminal Emulation Programmer’s Reference Guide 5-13
THE WINDOW DISPLAY MODE
ALLOWS THE TERMINAL USER
TO VIEW ANY PART OF THE
ACTUAL VT220 SCREEN AND
TO MOVE ABOUT THE VT220
SCREEN USING THE CURSOR
CONTROL KEY.
RT5900 Radio
Terminal
VT220 Terminal
INDOW DISPLA
S THE TERMIN
EW ANY PART
L VT220 SCRE
Figure 5-2
RT5900 Windowing Mode
If you try to move the cursor off the display in any direction,
the window shifts one or eight lines or columns in the direc-
tion of the cursor movement. This lets you move the view-
ing window around within the larger VT220’s screen. The
display does not wrap around when the window reaches the
top or side boundaries of the virtual VT220 screen. A beep
error tone sounds when you try to move the window beyond
the top, bottom, left, or right boundary.
The following chart shows how to use the arrow keys in
combination with [GOLD] and [BROWN] to move through
the radio terminal’s display.