Intermec VT220/ANSI, Programmer'S Reference Manual

Page: 246 / 276

SECTION 9
"
Extended Commands
9-40 VT220/ANSI Terminal Emulation Programmer’s Reference Guide
Straight or Computer Identics 2of5
If the Straight or Computer Identics bar code is enabled,
select the maximum and minimum lengths and the 1st and
2nd fixed bar code lengths according to your requirements
(Table 9-21). (The PEN*KEY 6400 Computer’s internal
engine does not support Straight or Computer Identics
2of5.)
Table 9-21
2of5 Characters
Line 1, Columns 20--28
Column Characters
Description
20 0
1
2
(Space)
Straight and Computer Identics 2of5
disabled.
Computer Identics 2of5 enabled.
Straight 2of5 enabled.
No change from current setting.
21--22 XX
(Spaces)
Maximum length Straight or Com-
puter Identics 2of5. See the
manufacturer’s bar code specifica-
tions for further information.
No change from current setting.
23--24 XX
(Spaces)
Minimum length Straight or Com-
puter Identics 2of5. See the
manufacturer’s bar code specifica-
tions for further information.
No change from current setting.
25--26 XX
(Spaces)
1st fixed bar code length for Straight
or Computer Identics 2of5. See the
manufacturer’s bar code specifica-
tions for further information.
No change from current setting.
27--28 XX
(Spaces)
2nd fixed bar code length for Straight
or Computer Identics 2of5. See the
manufacturer’s bar code specifica-
tions for further information.
No change from current setting.