Intermec VT220/ANSI, Programmer'S Reference Manual

Page: 59 / 276

VT220/ANSI Terminal Emulation Programmer’s Reference Guide 4-1
Section 4
RT1700 Radio Terminal
" " " " " " " " " " " " " " " " " " " " " " " " " " " "
VT220/ANSI Display Emulation
The RT1700 Radio Terminal’s liquid crystal display (LCD)
shows radio terminal and VT220 prompts, and information
you type. Because the VT220 terminal’s screen is 80 col-
umns by 24 lines, the radio terminal represents a part of
the information on the larger VT220 screen.
"
NOTE: Radio terminals in the RT1700 Series have UHF, 900 MHz, or 2.4
GHz radio modules.
Host View Size
The host view size is 24 characters high by 80 characters
wide.
Screen Size
You can select the number of display lines and characters
per line. The options are 12, 17, 22, or 26 characters per
line by 4, 6, 8, 10, 12, 16, or 21 lines. The default is 22
characters per line by 8 lines.
To change the screen size, open the firmware by pressing
[GOLD]+[BLACK]. Then select the following options in
this order: LCD PARMS, SCREEN SIZE.