Intermec VT220/ANSI, Programmer'S Reference Manual

Page: 188 / 276

SECTION 8
"
Programming
8-52 VT220/ANSI Terminal Emulation Programmer’s Reference Guide
(Continued)
Sequence
Description
ESC W
End protected area.
ESC [ 1 C
Move cursor forward one position.
ESC F
Start selected area.
ESC [ 4; 9 H
Move cursor to Row 4, Column 9.
ESC G
End selected area.
ESC V
Start protected area.
ESC [ 5; 1 H
Move cursor to Row 5, Column 1.
“Qty:”
Display literal.
ESC [ 1 D
Move cursor back one position.
ESC W
End protected area.
ESC [ 1 C
Move cursor forward one position.
ESC F
Start selected area.
ESC [ 5; 13 H
Move cursor to Row 5, Column 13.
ESC G
End selected area.
ESC V
Start protected area.
ESC [ 24; 80 H
Move cursor to Row 24, Column 80.
ESC W
End protected area.
ESC [ 26 $ |
Set the number of columns to 26.
ESC [ 1; 8 r
Set top at 1, bottom at 8 rows.
ESC [ 3 g
Clear tab stops.
ESC [ 2; 5 H
Move cursor to Row 2, Column 5.