Intermec VT220/ANSI, Programmer'S Reference Manual

Page: 207 / 276

VT220/ANSI Terminal Emulation Programmer’s Reference Guide 9-1
Section 9
Extended Commands
" " " " " " " " " " " " " " " " " " " " " " " " " " " "
Overview
Extended commands govern abilities unique to wireless sta-
tions. You can use extended commands to print, scan bar
codes, and send communications over the wireless station’s
RS-232 port. You can also use extended commands to set
wireless station parameters from the host computer. The
host computer sends the commands to the wireless station.
The following chart lists the extended commands.
Name Characters
Transmit and Receive On RS-232 Port #F
Transmit Only On RS-232 Port #P
Receive Only On RS-232 Port #G
Set Parameters #H
Return Version #V
Tone #T
Scan Bar Code Parameters #S
To use extended commands, you must enable the extended
command feature for the wireless station’s firmware. The
following chart describes how to access the firmware’s main
menu.