Intermec VT220/ANSI Programmer'S Reference Manual Download Page 218

Page: 218 / 276

SECTION 9

Extended Commands

9-12

VT220/ANSI Terminal Emulation Programmer’s Reference Guide

Table 9-2

Transmit Only Characters

Line 1, Columns 2--12

Column Character *

Description

Extended command.

Transmit Only On RS-232 Port command.

Speed (bits per second).

1200.

2400.

4800.

9600.

19200.

38400.

0 (zero)

(Space)

Data parity.

None.

Even.

Odd.

Number of data bits.

Seven.

Eight.

Number of stop bits.

One.

Two.

CTS flow control.

Disable.

Enable.

* Some wireless stations do not support some characters. Refer to the wireless

station’s user guide for supported characters and options.

Summary of Contents for VT220/ANSI





















































































































































































































































































Search results

Summary of Contents for VT220/ANSI

Reviews:

Intermec VT220/ANSI, Programmer'S Reference Manual, Page: 218 / 276

Search results

Summary of Contents for VT220/ANSI

Reviews: