Intermec VT220/ANSI, Programmer'S Reference Manual

Page: 157 / 276

SECTION 8
"
Programming
VT220/ANSI Terminal Emulation Programmer’s Reference Guide 8-21
Table 8-12 (Continued)
Selectable Terminal Modes
Mode
(Mnemonic) Wireless Station Action Sequence*
Set Mode
Mode
(Mnemonic) Wireless Station Action Sequence*
Reset Mode
Screen
(DECSCNM)
Reverse CSI ? 5 h Ignores this code.
Screen
(DECSCNM) Normal
CSI ? 5 l Selects normal (light characters on a
dark background).
Origin
(DECOM)
Origin CSI ? 6 h Ignores this code. Origin
(DECOM)
Absolute CSI ? 6 l Ignores this code.
Auto wrap
(DECAWM)
On CSI ? 7 h Graphic display characters received
when the cursor is at right margin ap-
pear on the next line. The display
scrolls up if cursor is at end of the
scrolling region.
Off CSI ? 7 l Graphic display characters received
when cursor is at right margin replace
previously displayed characters.
Auto repeat
(DECARM)
On CSI ? 8 h Ignores this code. Auto repeat
(DECARM)
Off CSI ? 8 l Ignores this code.
Print form
feed
(DECPFF)
On CSI ? 18 h Selects form feed (FF) as print ter-
mination character. The wireless sta-
tion sends this character to the printer
after each print screen operation.
Off CSI ? 18 l Selects no termination character. The
wireless station does not send an FF
to the printer after each print screen
operation.
* The last character of each reset mode sequence is lowercase L (6C hexadecimal). * The last character of each reset mode sequence is lowercase L (6C hexadecimal).