Interlogix TruVision DVR 40, User Manual

Page: 90 / 122

84 TruVision DVR 40 User Manual
Notification settings
For each alarm notification type, there are several ways to specify how to handle an alarm event.
To setup the notification settings
1. In the Alarms menu go to the
Notification
setup button and press the joystick for Enter, or
left-click the mouse. The
Notification
submenu appears.
2. Go to the
Notify on
list box and select one of the options listed. See Table 12.
Table 12: List of notification options
Condition When alarm occurs
HDD Full Hard drives are full (only in
No overwrite
)
PAL/NTSC Mismatch The input and output have a different video format
Illegal Access Login failed on the unit Local as Remote
IP Address Conflict Two devices on the network have the same IP address
Network Failure Network connection is lost
Video Notification A distorted video signal is connected to the video input
3. For each option on how to respond to triggers and alarm outputs press Enter or left-click the
mouse to enable (  ) or to disable.
4. When completed, select OK to return to the Alarms menu.
5. When you have made all the changes required in the Alarms menu, go to OK and press
Enter or left-click the mouse to save all changes and return to the main menu.