Interlogix TruVision DVR 40, User Manual

Page: 54 / 122

48 TruVision DVR 40 User Manual
Table 8: List of dwell time options
Options Description
Off The live display will not automatically switch.
5S The live display will automatically switch after 5 seconds.
10S The live display will automatically switch after 10 seconds.
20S The live display will automatically switch after 20 seconds.
30S The live display will automatically switch after 30 seconds.
For example: If a 16-channel TVR 40 has the 4-screen live mode and the 20-second dwell
time selected, the TVR 40 will cycle four camera displays every 20 seconds.
5. Go to the
Audio
check box. You can select to hear and record audio from the selected
camera. Press Enter or left-click the mouse to enable (  ) or disable audio.
6. Go to
Alarm Aux Out
to select which monitor should work as an alarm spot monitor. If there
is an alarm, the video will pop up on this monitor.
7. Go to the
Alarm Dwell Time
edit box. This is the time delay before the alarm video appears
on screen. If there is more than one alarm, there is also the delay switching between the
alarm videos. Select the time delay required: Off, 3, 4, 5, or 10 seconds.
8. Go to
Display Layout
. Select the sequence in which the cameras will be displayed in the
main monitor. Cameras are sequenced in numeric order by default. Each numbered square
on-screen corresponds to that numbered camera. Press the number button that
corresponds to the camera you want displayed first. Continue for each camera. The
sequence order is displayed in the bar underneath.
9. When complete, go to OK and press Enter or left-click the mouse to accept all the changes
and return to the Display menu.
10. When you have made all the changes required in the Display menu, go to OK and press
Enter or left-click the mouse to save all changes and return to the main menu. Press the
Menu button to return to live mode.