manualshive.com logo in svg

Interlogix TruVision DVR 40, User Manual

Share
Download
Interlogix TruVision DVR 40 User Manual Download Page 48

42 

TruVision DVR 40 User Manual 

Figure 18: The Display setup menu  

 

The following procedures show how to change the monitor display settings from the Display 
menu. They can be changed in any order.  

Selecting a language 

To select a language 

1.  In the Display menu go to 

Language

 and do one of the following: 

Front panel

: Select the list box. Press the joystick for Enter. Move the joystick up or down to 

scroll through the languages. Press the joystick to select a language. 

IR remote control

: Use the IR remote control arrow buttons to select the list box and press 

OK. Use the up/down arrows to scroll through the language and press OK to select a 
language. 

Mouse

: Left-click the mouse to select the required language. The language on screen 

changes immediately.  

The default language is English. 

Note: The last language used on the TVR 40 will be the unit’s language when the system is 

rebooted. 

2.   When you have made all the changes required in the Display menu, go to OK and press 

Enter or left-click the mouse to save all changes and return to the main menu. Press the 
Menu button to return to live mode. 

 

Summary of Contents for TruVision DVR 40



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands