![background image](http://html1.mh-extra.com/html/interlogix/truvision-dvr-40/truvision-dvr-40_user-manual_2076836009.webp)
TruVision DVR 40 User Manual
3
Installation
This section describes how to connect the TruVision DVR 40 unit.
Connecting the devices
Figure 2 shows the back panel connections and describes each connector. There are variations
between the different model types.
Figure 2: TruVision DVR 40 back panel connections (16-channel model shown)
Required connections
A. Connect up to 16 cameras to the standard BNC video inputs.
Note:
If a camera is incorrectly connected to the TVR 40, the monitor shows a Video Loss message. Check the
connection and reconnect the camera if necessary.
B. Connect monitor A (main) to the output VIDEO OUT. Connect the audio output (
) to AUDIO OUT if required.
You can use either analog or VGA output. Both outputs will display the same video information.
Optional connections
C. Connect a spot monitor (Mon B) to the TVR 40. Connect the monitor video to VIDEO OUT. Connect the
monitor audio (if used) to AUDIO OUT (
).
D. Connect up to 16 audio signals to the standard BNC audio inputs (315 mV).
E. For future use.
F. Connect the VGA display (max. 1024 × 768 @ 60 Hz).
G. Connect an ATM or optional ProBridge using the supplied RS-232 cable.
H. Connect the network devices.
Summary of Contents for TruVision DVR 40
