Interlogix TruVision DVR 40, User Manual

Page: 30 / 122

24 TruVision DVR 40 User Manual
To activate/deactivate the on-screen status bar
Front panel/remote control Press the F2 button on the front panel to activate or deactivate the status bar.
Mouse Right-click the mouse and select
Status Bar
from the menu.
Selecting a monitor
The TVR 40 can be connected to up to two monitors. However, only one monitor can be
controlled at a time. You can select from which monitor to display the camera views in live mode.
To switch between monitors A and B
Front panel Press buttons A or B to switch between monitors A and B.
IR remote control Press buttons Mon A or Mon B to select between monitors A and B.
Mouse Right-click the mouse and select
Swap Monitor
from the menu shown.
Viewing in multiscreen
The 16-channel TruVision DVR 40 User Manual has five multiscreen display formats available
including full screen. The eight-channel TruVision DVR 40 User Manual has four multiscreen
display formats.
A cameo is any cell in a multiscreen display. A camera picture can only be shown in one cameo
at a time. To change the order of cameras in the cameos, see “To setup multiscreen and dwell
time” on page 46”.
To view a full screen display
Front panel Press the numeric button that corresponds to the camera number. For
example, press button 10 to preview camera number 10.
IR remote control Press two number buttons that corresponds to the camera number. For
example, press buttons 0 and 2 to preview camera number 02.
Mouse Right-click the mouse and select
Camera
from the menu shown. Select the
camera required.