Interlogix TruVision DVR 40, User Manual

Page: 78 / 122

72 TruVision DVR 40 User Manual
The following procedure shows how to change the recording settings of a selected camera in the
Recording menu. They can be changed in any order.
In the main menu go to the Network menu icon and press Enter or left-click the mouse. The
Network menu appears.
Caution:
The TVR 40 will automatically reboot when any network parameter is changed and
saved.
Network settings
Use the network menu to set standard network settings.
IP This field shows the device’s current IP address.
Subnet mask This field shows the subnet mask for your network so the DVR will be
recognized within the network.
Gateway This field shows the gateway for your network so the DVR will be
recognized within the network.
DNS This field shows the DNS server for your network.
If you are using a static IP address, these values listed above will need to be entered manually. If
the network type is DHCP or PPPoE, these values will be automatically assigned.
To define the network settings
1. In the Network menu go to the
IP
edit box and press Enter or left-click the mouse to enter
edit mode. Using the numeric buttons on the front panel, or the on-screen keyboard, enter
the IP address. Press Enter again or left-click the mouse to exit edit mode.
2. Go to the
Subnet
edit box and press Enter, or left-click the mouse to enter edit mode. Using
the numeric buttons on the front panel, or the on-screen keyboard, enter the subnet mask
number. Press Enter again or left-click the mouse to exit edit mode.
3. Go to the
Gateway
edit box and press Enter or left-click the mouse to enter edit mode. Using
the numeric buttons on the front panel, or the on-screen keyboard, enter the gateway IP
number. Press Enter again or left-click the mouse to exit edit mode.
4. Go to the
DNS
edit box and press Enter or left-click the mouse to enter edit mode. Using the
numeric buttons on the front panel, or the on-screen keyboard, enter the DNS number. Press
Enter again or left-click the mouse to exit edit mode.
5. Go to the
Com Port
edit box and press Enter or left-click the mouse to enter edit mode.
Using the numeric buttons on the front panel, or the on-screen keyboard, enter the address.
Enter again or left-click the mouse to exit edit mode. The number must be greater than 2000.
6. Go to the
HTTP Port
edit box and press Enter or left-click the mouse to enter edit mode.
Using the numeric buttons on the front panel, or the on-screen keyboard, enter the IE