Interlogix TruVision DVR 40, User Manual

Page: 80 / 122

74 TruVision DVR 40 User Manual
4. Go to the
Password
edit box and press the joystick for Enter, or left-click the mouse. Enter
the e-mail account password.
5. Go to the
Sender Name
edit box and press the joystick for Enter, or left-click the mouse.
Using the on-screen alphanumeric keyboard, enter the name of the person sending the e-
mail.
6. Go to the
Sender Address
edit box and press the joystick for Enter, or left-click the mouse.
Using the on-screen alphanumeric keyboard, enter the e-mail address of the sender.
7. Go to the
Email Server
edit box and press the joystick for Enter, or left-click the mouse.
Using the on-screen alphanumeric keyboard, enter the SMTP server address.
8. The e-mail notifications can be sent to up to two addresses. In the
Mail Receiver No.
list box
select whether Receiver Number 1 or 2 will receive the notification. Depending on which is
selected, the Name and Address numbers will automatically change.
9. Go to the
Name
edit box and press the joystick, or left-click the mouse. Using the on-screen
alphanumeric keyboard, enter the name of the receiver that should appear in the e-mail as
the receiver.
10. Go to the
Address
edit box and press the joystick for Enter, or left-click the mouse. Using the
on-screen alphanumeric keyboard, enter the e-mail address of the receiver.
11. Repeat steps 8 to 10 if there is a second receiver.
12. If jpegs will be sent with the e-mails, go to
Attachment
and press the joystick, or left-click the
mouse, to enable (  ) the check box. The J
PEG Capture Interval
list box becomes activated.
13. If jpeg images of a recording will be sent with an e-mail, you need to define the capture
interval in seconds between each jpeg. Select the capture interval from the list: 2, 3, 4 or 5
seconds.
Note: Check with your ISP or IT department for details on mail server and mail server login.
14. Select OK to return to the Network menu.
15. When you have made all the changes required in the Network menu, go to OK and press
Enter or left-click the mouse to save all changes and return to the main menu.
Advanced IP settings
Use this setting if using a direct connection to an ADSL.
To setup the Advanced IP settings
1. In the Network menu go to the
Advanced Settings
setup box and press the joystick for Enter,
or left-click the mouse. The Advanced Settings submenu appears.
The
MAC Address
edit box shows the MAC address of the TVR 40 unit.