Interlogix TruVision DVR 40, User Manual

Page: 53 / 122

TruVision DVR 40 User Manual 47
2. Go to the
Monitor Output
list box
.
Select between monitor output A or B. Monitor A is default.
3. Go to the
Display
list box
.
Select the desired multiscreen mode from the drop-down list.
Press Enter to select the list box and then move it up or down to scroll through the options.
Press Enter again to select the required option. If using the mouse, left-click the mouse to
scroll through the display formats. See Table 7 below for the options available.
Table 7: Multi screen options available
Number of TVR 40 channels Multi screen options
4 Full
4 way
8 Full
4 way
8 way
16 Full
4 way
9 way
12 way
16 way
4. Go to the
Dwell Time
list box. The dwell time is the amount of time the unit stays on an
individual camera before moving onto the next one in a sequence.
Select the desired dwell time from the drop-down list. Press Enter to select the list box and
then move it up or down to scroll through the options. Press Enter again to select the
required option. If using the mouse, left-click the mouse to scroll through the display formats.
See Table 8 on page 48 for the options available.