manualshive.com logo in svg

Interlogix TruVision DVR 40, User Manual

Share
Download
Interlogix TruVision DVR 40 User Manual Download Page 68

62 

TruVision DVR 40 User Manual 

7.   When you have made all the changes required in the Camera menu, go to OK and press 

Enter or left-click the mouse to save all changes and return to the main menu. Press the 
Menu button to return to live mode. 

 

To copy a camera’s settings to another camera 

1.  In the Camera menu go to the 

Camera 

list box and select the camera whose options you 

want to copy. 

2. Go to 

Copy to Camera

 and select the camera to which you want to copy the settings.  

3.  Go to Copy and press Enter or left-click the mouse. All settings will be copied to the selected 

camera. 

Note: Motion alarm zones cannot be copied. 

4.   When you have made all the changes required in the Camera menu, go to OK and press 

Enter or left-click the mouse to save all changes and return to the main menu. Press the 
Menu button to return to live mode. 

 

Summary of Contents for TruVision DVR 40



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands